GDA-20AD | Ginice GDA-20AD | DAMPER ACTUATOR GDA-20AD
Used for operating Damper for ventilation and Air handling facilities.
Nominal torque is 20Nm and can be covered damper surface area for 4㎡.
Used for ON / OFF damper control.
Used for air damper, ventilating gas damper, etc.
Select operating direction ( CW or CCW ) by changing the connection of wiring
Actuator will move within 0°”or“90° in case of normal input supply power
When the power is OFF at AC24V or AC220V, Actuator will stop moving at the current position
| Supply Voltage | AC 24V ±10%, or (AC220V) |
| Frequency | 50 / 60 ㎐ |
| Power Consumption | 5.5VA ( On Operation ) |
| Control Signal | ON / OFF Switch |
| Torque | 200 Kg-㎝(20 Nm) |
| Rotation Range | 0 ~ 90° |
| Mechanical Rotation Range | 95°±2° ( mechanical limit at 95°) |
| Direction of Rotation | Forward/Reverse direction ( changing wire connection) |
| Operating Tie | Apprx. 110 sec. |
| Ambient temperature | -30 ~ +50℃, below 95%RH |
| Connecting Cable | 0.5sq.mm ~ 1.5mm |
| Noise Degree | 45 dB |
| Protection Housing Class | IP 42 |
| Weight | 1.67 Kg |
| Applicable Damper Shaft | Φ10~Φ20 ( round ), □10~□16 ( square ) |
Reviews
There are no reviews yet.